首页分享 Hamster House

Hamster House

来源：萌宠菠菠乐园时间：2026-01-21 21:03

Hamster Minimalist Modular Magnetic Observation Hideout | Modular Magnetic Hamster Hideout

Design Updates / Design Updates

This design adopts a split-type solution of a **main hideout + independent lid**. Through the magnetic attraction function at the four corners, you can easily fix the lid to the front (observation side) of the main hideout. This design not only facilitates daily cleaning and maintenance but also makes observing pets more flexible: cover it when privacy is needed, easily remove it when you want to observe, or use it with a transparent cage to get a regular panoramic view

✨ Key Features / Key Features

**Modular Structure:** Consists of two parts: "main hideout" and "independent front lid", assembled easily with magnetic opening and closing**Panoramic Observation View:** Large hollow area on the front. When used with a transparent cage, you can directly see the cute activities and sleeping positions of your hamster inside**Strong Magnetic Lock:** Reserved **10mm x 1mm** circular magnet holes at the four corners ensure the lid fits snugly with the main hideout and adheres firmly**User-Friendly Entrance:** A large circular entrance with a **diameter of 8cm** is located on the left side, allowing Syrian hamsters and various dwarf hamsters to enter and exit freely**Minimalist Rounded Design:** The overall design has no sharp edges, which is not only visually simple and beautiful but also prevents pets from bumping and injuring themselves. It also saves material during printing and has a sturdy structure

️ Technical Specs / Technical Specs

**Overall Dimensions:** 200mm (L) x 120mm (W) x 120mm (H)**Entrance Dimensions:** Left circular hole, 80mm diameter**Required Accessories:** * 8 strong circular magnets with 10mm diameter / 1mm thickness (4 for the main hideout, 4 for the lid)**Recommended Materials:** * **PETG** (recommended, temperature resistant, good toughness, easy to disinfect). **PLA** (eco-friendly, low printing difficulty)

️ Printing Tips / Printing Tips

**Part Orientation:** The main body is recommended to be printed with the bottom surface facing down; the lid is recommended to be printed with the flat surface facing down to achieve optimal surface flatness**Support Settings:** A small amount of support might be needed above the 8cm circular hole on the side, and "tree supports" are recommended for the front hollow area**Magnet Installation:** After printing, insert the magnets into the reserved holes. **Note: Before installation, be sure to confirm the polarity of the magnets to ensure the main hideout and lid attract each other, not repel.** A small amount of 401 glue is recommended for reinforcement**Safety Check:** Please ensure the glue is completely dry and odorless before placing it in the cage, and check that the magnets are secure to prevent pets from accidentally ingesting them

Boost Me (for free)

Do you like this observation hideout? Then give it a boost!